Cut the molding swivel the saw to a 45 degree angle to match the direction of the molding set the board against the saw at the mark and make the cut. By video journalist luis diazwebsite.
Be sure to purchase enough extra stock to account for cutting and fitting.
How to install crown molding. Https amzn to 2lvfmwtif you want to help support shannon to produce more videos like this vi. Cut the second piece at a 45º angle cutting just as you would for an outside corner. Place it in the miter saw and cut with the blade set to 0 degrees.
Begin the crown molding installation square cut both ends of the first piece of crown and nail it into place. You can t do it like any other trim pieces because the molding sits at an angle between the wall and the ceiling image 1. All the other pieces are cut square or mitered at one end and coped at the other.
Cut the corners of the molding the hardest part of installing crown molding is cutting the corners. Cut the first piece of crown molding square. Crown molding sits at an angle on the wall so it s best to cut it at an angle rather than laying it flat on the saw.
How to install crown molding. Use a dark pencil to trace along the edge of the cut of the second piece along the molded front of the piece. Using a coping saw image 2 is the easiest way to cut the corners because a coped joint is tighter than a mitered joint.
Here is a link to the kreg crown mould jig used in the video. Locate and mark studs for fastening use a stud finder to locate and mark all the studs around the room. You can use a store bought jig or make your own guide.
To install crown molding first use a tape measure to measure and add up the length of all the walls.