How To Clean A Washer Lint Trap

This will allow all the dirt on the trap to be loosened up. Considering this how do you clean the lint trap in a washing machine.

How To Make A Washing Machine Lint Filter Washing Machine Washing Laundry

If you can t remove the filter you can use a paper towel or even a brush.

How to clean a washer lint trap. If you cannot remove your lint trap then you will need to use a brush or a cloth to gently remove the link that is stuck to it to the best of your ability. The top can often be unscrewed and cleaned. Identify where the lint trap is and remove it if you can.

It may take several turns of the handle on the snake to get a clogged area attached to the snake. Pull out the drain plug. Slide your fingers around the top of the washer drum and you might find a screen to pull out or just simply a great deal of lint that needs to be removed.

The quickest way to clean out your filter is to remove it from the unit and soak it in hot water loosening any clog or trapped residue. Open the door pull out the trap clear it manually and rinse it under running water. Rinse the drain plug.

The hot water will help to clear away any detergent or fabric softener residue that slows drainage. You can also buy some disposable filters that will need to be replaced regularly. It should leave the lint trap clear of any residue.

How to clean the lint collector for the washing machine. Attached is the filter to be cleaned. Cleaning your washer s lint trap if you can remove the screen on your washer then you should remove it and submerge it in hot water for 10 minutes to remove any residue.

Near the top of the center agitator. Once you have turned it several times pull the snake out and clean off all debris. These filters which are common on front loading models also catch lint and should be cleaned periodically.

The top rim of the washer tub. If the filter is secured in place clean lint from it with a soft brush or paper towel. Use a paper towel or small brush to clean the lint off the screen mesh.

Snake the drain until all resistance is gone. If the screen is removable soak it in hot water for 10 minutes to clear away residue. If you can remove it make sure that you take it out and leave it in a sink filled with hot water for at least 10 minutes.

If the screen is removable soak it in hot water for ten minutes before replacing. Pull the excess dirt fiber lint and debris from the filter. Then insert the snake again to clear out any additional debris.

In some cases the lint trap cannot be removed. If the lint trap can be removed get it out and allow it to soak in hot water for about 10 minutes. Some filters are inside the center agitator.

If your machine has one you ll probably see a small door on the bottom of the front panel. If the filter cannot be removed clean it out with brush. A clogged filter limits the washing machine s efficiency and can also lead to more lint deposits on clothes as well as poor drainage.

Read more